AAQ Controller Interface Panel (CIP)
15
3.4.4.
Prompt 2 Screen
Figure 15 - CIP Prompt Screen 2
The Prompt 2 Screen gives instructions on how to invoke the “stow” command. The down arrow will navigate to the
Standard Home Screen.
↓
3.4.5.
Standard Home Screen
Figure 16 - CIP Standard Home Screen
The Standard Home Screen shows world position and target information as well as the short command response
message. There are multiple screens on this Standard Home Screen level that can be accessed via the left and right
arrow buttons. From any of this level’s screens, the down arrow will navigate to the Alarms Prompt Screen (Figure
22).
→
3.4.6.
Target Position Screen
Figure 17 - CIP Target Position Screen
The Target Position Screen is not used for this release. The right arrow will navigate to the GPS Screen.
→
