5
Package Contents
We strive to package our products with care to ensure that they arrive intact and undamaged. Even
with our best efforts, issues can occur during shipping. It is important for you to inspect and verify
the completeness of your order as soon as it arrives. Please inspect the outer package for
damage, take pictures and immediately report any significant concerns to AVL. Once you are
ready to open the package, please carefully remove all contents from the packaging and verify that
all parts, hardware arrived. Your package should contain:
E-Lift system (1) with attached:
○ Motor lifting cable (1) with clip retainer (1)
○ Motor return cables with spring (1) with clip retainer (1)
Mounting blocks (2)
Cam-cylinder assemblies (2) secured in mounting order, including:
○ Lifting cam-cylinder with dobby to cylinder lifting cable (1) & clip retainer (1)
○ Lowering cam-cylinder with dobby to cylinder lifting cable assembly (1) & clip retainer (1).
NOTE: The dobby to lowering cylinder assembly consists of two cables and a small
extension spring joining the cables.
○ Spacers – Each configuration uses different quantity and size of spacers which are
provided in mounting order.
○ Stop collars - Each configuration uses different quantity and size of stop collars which are
provided in mounting order.
○ Axle bushings (4) - Older looms (ONLY) used a ½” axle and require axle bushings in each
end of the cam-
cylinders to adapt from their 5/8” diameter holes.
○ ½” stop collar (1) - Older looms (ONLY) use axle caps on the outside ends to retain the axle
in the side frame. You will be removing the rear or right side axle cap which is destructive to
the axle cap. The stop collar replaces the axle cap. An Allen wrench for the stop collar is
provide in the hardware pack.
Foot or hand switch with cord (as ordered) (1)
Power cord (1)
Hardware pack, includes:
○ Mounting hardware for E-Lift and mounting blocks
○ Allen wrench for ½” ID stop collar (where applicable)
○ Allen wrench for 5/8” ID stop collar (where applicable)
Tools
○ 7/16” & 1/2" wrenches
○ 7/16” & 1/2” sockets with
wrench
○ Phillips head screwdriver
○ Needle nose pliers
