AVIWEST DMNG PRO 100, Руководство пользователя

Страница: 61 / 78

61
Setting the Parameters for the MPEG-TS Output
The DVB ASI TS tab allows you to set the parameters for streaming with MPEG-TS and with
"TS over IP" transport protocols.
The MPEG-TS contains a Multiplex with a single service including video, audio and metadata.
The transport stream is outputted in 188-byte packets over ASI and over IP if the "TS over IP"
option has been enabled. The MPEG-TS is compliant with the standard MPEG-2 Part1,
System (ISO/IEC standard 13818-1).
To stream using the MPEG-TS protocol, you first have to add a dedicated Live profile, see
Configuring a Live profile for Streaming using a Satellite Modulator.
You can then configure the parameters for the MPEG-TS output.
①
Access the DVB ASI TS tab.
②
Let the PID s preset values for the audio, video, PMT and PCR or change them.
The Video PID must be included between 32 and 8190.
③
Let the PCR rate as it is or change it.
The maximum value for PCR rate is 40 ms according to the DVB .
④
Set the TS bitrate, in kbps, according to the bandwidth of the satellite network used.
⑤
If you want to use TS over IP, tick the "TS over IP" checkbox.
Tick the "TS over IP" checkbox to stream over Ku band if it's one-way.
Note : You can use the default values set for the IP address, port and Time to
leave, or edit them. If you want to enter a different port number, please ensure that
you do not use
Assigned ports .
⑥
Click the "SAVE CONFIG" button.