Introduction
The Multimedia LCD S1V is a cost-effective colour LCD display with an easy operation interface that supports local
video playback. The slim mechanical profile is an ideal choice for use in confined spaces for simple aesthetic feel in the
buildings.
The Multimedia LCD S1V series has the following function:
+
Displays floor and travel direction of the elevator (when used with E-Motive Encoder)
+
Displays date and time
+
Displays user-defined messages/pictures slideshow at pre-defined time intervals
+
Displays video playback of .mp4 and .avi format
+
Displays in either landscape or portrait mode
+
Displays layout and content based on User Content Editing Software
Multimedia LCD S1V
Installation Guide
Ref No. 148-1-E1-003 (GB) Version 1
INPUT
Pin No.
Symbol
Function
1
+24V
Supply (+24V)
2
GND
Supply Ground
Table 1: INPUT Power 24VDC
Wiring Connections:
AUD-R
Pin No
Symbol
Function
1
NA
Audio Output
2
NA
Audio Output
EMD
Pin No
Symbol
Function
1
DR
Data Return
2
D
Data
Table 2: EMD E-Motive 4-wire Signal
Table 3: AUD-R Audio Signal
Note: Please also refer to the relevant accessories installation guide or wiring diagram for additional information
*Accessories (USB, Encoder) sold separately
*LAN connection is used only when Network is required.
*Thumbdrive is used for content updating
*Picture used for illustration only
CX Encoder
SDHC Card
Switches
Symbol
Function
Tact Switch
SW3
Value setting for individual
mode
Tact Switch
SW4
Mode Select for Date/Time
setting and address setting
Table 4: Tact Switches Function*
LAN
E-Motive 4-wire
Thumbdrive/USB
INPUT
+24V GND
AUD-R
EMD
D DR
*Note:
Press SW3 & SW4 together at the same time to access Mode setting
Then when SW4 is pressed, the Mode will be displayed
