Aviosys IP Power 9223K-A, Руководство пользователя

Страница: 23 / 25

- 23-
Ref#9223K05260001
7.) Controlling the Device
CGI HTTP Commands
Http commands allow you to control the device with commands. The basic commands are provided below.
There are two ways to input http commands with authorization required
Password in http:
http://login:password@ipaddress:port/command
Password not in http:
http://ipaddress:port/command
Note: If you use the password not in http: command you will need to enter it when the browser asks
for the password.
Help Command
The help command will give you the commands that are available on the device. Simply type the codes for
the correct code.
Ex:
Output:
Set Power Command
The Set Power command allows you to control the devices on/off through the http commands. With this
command you can integrate can integrate the 9223K-A with any other system.
Outlet Power On Power Off
Output 1 61 = 1 61 = 0
Output 2 62 = 1 62 = 0
Output 3 63 = 1 63 = 0
Output 4 64 = 1 64 = 0
Ex. For Single Port Control On
Output:
P61=1
Ex. For Single Port Control Off
Output:
P61=0
Ex. For Multiple Port Control
Output:
P61=1,P62=1,P63=1,P64=1