- 18-
Ref#9223K05260001
IP Address:
Here is where the user can change the IP Address of the device and port. Also IP Edit can be
used to alter the devices IP Address.
Subnet Mask:
Here is where the user can change the IP Address of the device and port. Also IP Edit can
be used to alter the devices IP Address.
Default Gateway:
Enter the gateway for the router.
DNS:
Enter the DNS information here.
Note: Not having the correct DNS information will affect the NTP and SMTP mail server.
CNT: (Cross Network Technology):
This will enable or disable the CNT on the device. CNT is basically a
function that allows the device to work though the network without having to port forward the device. Please
see manual on CNT or IP Power Center for more information on how to use CNT.
DHCP:
This will enable or disable the DHCP on the device
Beeper:
This will enable or disable the beep on the device
Http Command Verification:
This will enable or disable the http commands for the 9223K-A
Release Version:
Will provide information on the current firmware for the device
Advance Setup
The advance setup section allows the user to setup SNMP functionality for the 9223K-A. From here you can
select the Manager IP Address, to trap when the output has been triggered, or even send an email with the
output has been triggered.
Manager IP Address:
Type in the IP Address of the computer that will be managing the SNMP of the
9223K-A
Trap when DO has triggered:
This will send a SNMP trap when the digital Output has been triggered.
Send E-mail when DO has triggered:
This will send an E-mail every time the output has been triggered.
DDNS
The DDNS Setup allows the user to setup the 9223K-A with a DDNS server. This way instead of having to
remember long IP Addresses, the user now can easily use a WWW link to connect to the device. This also is
