8
AN-16/
i
-M M
ic
i
Nput
M
odule
u
ser
G
uide
EtherCon Connector
Some Aviom products use EtherCon® Cat‑5 connectors. The Neutrik EtherCon
connector is a dual RJ45 type connector. It can receive a standard Cat‑5e
cable or a cable fitted with the special heavy‑duty EtherCon connector.
When using a standard Cat‑5e cable, plug the cable into the center of the
jack; release the cable by pressing on the small plastic tab built into the cable
connector.
The locking EtherCon connector is similar to an XLR cable, the kind commonly
used on microphones. Insert an EtherCon equipped cable into the jack until
it clicks and locks in place. To remove the cable, press on the metal release
tab at the top of the panel‑mounted EtherCon jack and pull the connector
outward.
Cleaning and Maintenance Information
The exterior of your Aviom products should be cleaned with a dry, soft, lint‑
free cloth. For tougher dirt, you can use a cloth slightly dampened with water
or with a mild detergent.
When cleaning your Aviom products, never spray cleaners directly onto the
product surfaces. Instead, spray a small amount of the cleaning solution onto
a clean cloth first. Then use the dampened cloth to clean the product.
P
N
ote
:
Never use solvents or abrasive cleaners on the finished surfaces of
your Aviom products.
Содержание AN-16/i-m
Страница 1: ...P N 9310 1007 0001 rev 2 00 2009 Aviom Inc User Guide A N e t I n p u t M o d u l e AN 16...
Страница 52: ...44 AN 16 i M Mic Input Module User Guide Dimensions...
Страница 53: ...45 AN 16 i M Mic Input Module User Guide...
Страница 58: ...1157 Phoenixville Pike Suite 201 West Chester PA 19380 Voice 1 610 738 9005 Fax 1 610 738 9950 www Aviom com...
