Configuration Wizards
This chapter contains the following sections:
l
Getting Started Wizard
l
VLAN Configuration Wizard
l
ACL Configuration Wizard
Getting Started Wizard
The Getting Started Wizard will assist you in the initial configuration of the device.
1. In
Configuration Wizards
>
Getting Started Wizard
, click
Launch Wizard
.
2. Click
Launch Wizard
and
Next
.
3. Enter the fields in the General Information tab:
l
System Location — Enter the physical location of the device.
l
System Contact — Enter the name of a contact person.
l
Host Name — Select the host name of this device:
n
Use Default — The default hostname (System Name) of the device is: switch 123456,
where 123456 represents the last three bytes of the device MAC address in hex format.
n
User Defined — Enter the hostname. Use only letters, digits, and hyphens. Host names
cannot begin or end with a hyphen. No other symbols, punctuation characters, or blank
spaces are permitted (as specified in RFC1033, 1034, 1035).
4. Click
Next
.
5. Enter the fields in the IP Settings tab:
l
Interface — Select the IP interface for the system.
l
IP Interface Source — Select one of the following options:
l
DHCP — Select for the device to receive its IP address from a DHCP server.
l
Static — This is the recommended option for most of the applications. Select to enter the details
of the static IP address of the device manually:
n
IP Address — Enter the IP address of the interface.
n
Network Mask — Enter the subnet mask for this address.
n
Default Gateway — Enter the default gateway IP address.
n
DNS Server — Enter the IP address of the DNS server.
6. Click Next.
Configuration Wizards
6