7. Insert the GPU card edge connector firmly into the expansion card connector until the card is fully
seated.
8. Push the expansion card latch.
5. Restoring the Removed Components
When all the components of the kit have been installed:
1. Reinstall the top of the cooling shroud.
2. Close and lock the recorder cover.
3. If the recorder was rack mounted and removed to install the kit, remount it into the rack.
4. Reconnect all the cables to the recorder.
5. Power the recorder.
6. Confirming the Installation
Verify the upgrade is successful:
1. Log in to the ACC Client on a workstation on the same network as the AI NVR.
2. In the System Explorer, click
Site Setup
, and click
Site to expand the site containing the upgraded
AI NVR.
3. Click
to select the upgraded AI NVR.
4. Verify the status of the upgraded AI NVR and the presence of the two advanced processing cards:
5. Restoring the Removed Components
13
