4. Installing the New GPU card
1. Unpack the GPU card and prepare it for installation.
Note:
For instructions, see the documentation accompanying the card.
2. At the back of the AI NVR, locate where the GPU card needs to be installed.
3. Pull the expansion card latch.
4. Remove the filler bracket
Tip:
Store the filler bracket for future use. Filler brackets must be installed in empty expansion
card slots to maintain Federal Communications Commission (FCC) certification of the system.
The brackets also keep dust and dirt out of the system and aid in proper cooling and airflow
inside the system.
5. Pull the expansion card latch.
6. Align the connector on the GPU card with the connector on the riser.
4. Installing the New GPU card
12