Avigilon 10.0C-H5DH-D1-IR, Руководство по установке

Страница: 37 / 52

Installing the Camera into the NPT Adapter
Before installing the camera, you must first prepare either the wall mount or NPT pipe mount.
Note: The following steps show installation of the camera into NPT adapter installed onto a pipe.
The steps are the same for installing the camera to the wall mount.
1. Attach the lanyard to the camera base. Pull the required cables through the cable entry hole.
2. Pull the required cables through the rubber sealing grommet. For more information, see Inserting
Cables through the Sealing Grommet on page 11 .
3. Push the rubber sealing grommet with the required cables into the cable entry hole on the camera
base. The thread around the grommet should line up with the cable entry hole.
The rubber grommet should be pressed firmly into the cable entry hole to create a seal.
4. Push the camera base into the NPT adapter so that the 4 captive screws in the camera base align with
the mounting points on the NPT adapter.
Installing the Camera into the NPT Adapter 31