Installation
Camera Package Contents
Ensure the camera package contains the following:
l
Avigilon H4 PTZ Dome Camera
l
PTZMH-MT-NPTA1 kit:
o
1 ½” male NPT adapter
l
PTZMH-ACCS-CABL1 kit:
o
1 ½” NPT locking nut
o
T20 Torx key
o
Teflon Sealing Tape
o
RJ-45 crimp-on plug and weather-resistant housing
o
External Power wiring harness
o
External I/O wiring harness
Ensure the pendant wall mount (CM-MT-WALL1) package contains the following:
l
Pendant wall mount
l
Mounting template sticker
l
T20 Pin-In Torx driver
l
4 concrete anchors (#8-10)
l
4 screws (#8 x 1.25)
l
RJ-45 grommet piercing cap
l
Teflon sealing tape
Precautions for Installing Near Salt Water
Salt environments are hard on camera paint and external appearances but the camera's functionality will not be
affected if the cameras are installed as described in this guide.
Follow these precautions to avoid camera issues when installing in a salt heavy environment:
l
Use mounting accessories offered by Avigilon. All Avigilon accessories are tested to work with Avigilon
cameras in the rated environments.
l
If you use a third-party accessory, you
must
ensure that the material is compatible with the finish of the
camera housing or galvanic corrosion may occur.
l
Never pair steel mounting accessories with aluminum camera enclosures. Steel corrodes aluminum when
salt is introduced. The corrosion is an electrochemical reaction and will cause the corrosion to spread
across the entire camera body.
Installation
4
