IFD400 Series Pilot Guide
General 6-73
PAIRING A BLUETOOTH
®
KEYBOARD
The IFD has built-in Bluetooth capability that allows pairing with a
remote keyboard. The keyboard can be used to easily enter
waypoint identifiers, but it can also be used to change pages,
move cursor, and tune radios.
As with all Bluetooth devices, a keyboard must be paired with the
IFD before use. This pairing only needs to be done once and
then that specific keyboard can be used every time the IFD is
powered up.
NOTE
Dual IFD Installations Should Only Pair 1 IFD
To avoid issues arising from a keyboard only being
able to pair with one device at a time, dual IFD
installations should turn off Bluetooth on the Setup
page on one IFD.
NOTE
Acceptable Bluetooth Keyboards
Due to certification constraints, only Avidyne
supplied Bluetooth keyboards will be functional.
Before attempting to pair a Bluetooth keyboard, ensure the
keyboard has adequate charge, then turn it on using the switch
on the left side. Then, ensure that the Bluetooth option is turned
on in the Setup page.
To start the pairing process, start the IFD in maintenance mode
(see Maintenance Mode section, page 6-53). Select the "Config"
tab by either using the AUX button or by touching the tab. Then,
turn the right outer knob until the Bluetooth Setup page is
displayed. Wait until the IFD has been powered on for at least
one minute.
Press the button on the back of the keyboard to make it
discoverable. Then, press the "Start Scan" LSK on the IFD. After
Содержание IFD410 FMS/GPS
