![background image](http://html.mh-extra.com/html/avid-technology/venue-sc48/venue-sc48_manual_3031300086.webp)
VENUE SC48 Guide
74
Configuring Aux and Group Busses
Auxes and Groups share the available system busses. Configu-
ration options include the following:
16 Auxes + 8 Mono Groups
Divides the available system bus-
ses between 16 mono Aux busses and 8 mono Group busses.
8 Auxes + 8 Stereo Groups
Divides the available system busses
between 8 mono Aux busses and 8 stereo Group busses.
To configure the Aux/Group busses:
1
Put the system into Config mode.
2
Go to the Options page and click the
System
tab.
3
Click
Edit
.
4
Select a bus configuration.
5
Click
Apply
. The system restarts with the new bus configura-
tion.
Data Cleared When Changing Bus Configurations
When the bus configuration is changed, all settings are
cleared (or set to default) from the current console settings
and from all stored snapshots, for all Groups.
Linking Aux Busses
You can link odd/even bus pairs and pan input signals into
those bus pairs. Aux bus pairs are linked on a global basis, and
appear as linked on all channels. For information on linking
Auxes, see “Linking Aux Busses for Stereo Operation” on
page 87.
Naming Channels
Output channel names can be changed from the Outputs page
or from the Patchbay.
To change the name of an Output channel:
1
Go to the
Outputs
page or the
Patchbay
page.
2
Target the channel whose name you want to change by
pressing its Select switch or selecting it on-screen.
3
Double-click the channel name.
4
Type a new name and press Enter on the computer key-
board.
Assigning Busses to Hardware Outputs
Mains, Groups, Auxes, and Matrix mixer outputs can be as-
signed to any hardware output on the system. Available out-
put destinations include:
• Stage audio outputs
• FOH (local) audio outputs
• Pro Tools recording inputs
To assign a bus or mixer output to a hardware output from the
Patchbay:
1
Go to the Patchbay page and click the
Outputs
tab.
2
To the left of the channel grid, click the
Mains, Mtx
(Matrix)
,
Aux
or
Grp
(Groups) tab.
3
Click in the channel grid to assign a bus or Matrix mixer
output (listed on the left) to a hardware output (listed across
the top).
The Patchbay Outputs page shows the name of the bus or
mixer and its destination. The destination is also displayed be-
low the channel name in the Outputs page and Patchbay Out-
puts page.
Audio may be interrupted or may change levels during this
configuration procedure
Selecting a bus configuration
Changing the name of an Output channel in the Outputs page
When naming channels in the Patchbay, double-click the
channel name next to the grid to edit text; press Tab on the
keyboard to go to the next channel and Shift+Tab to go to
the previous channel.
Assigning an output in the Patchbay Outputs page
Output name and destination in the Patchbay Outputs page
courtesy of
www.sxsevents.co.uk
Phone: 0870 080 2342
email: [email protected]
Event production and Audio-Visual Services
www.sxsevents.co.uk