Avid Technology VENUE SC48 Скачать руководство пользователя

Страница: 256 / 272

VENUE SC48 Guide

244

Installing the ECx Client Software

The ECx Ethernet Control Software installer CD-ROM con-
tains remote control applications for both Windows and Mac.

Installing the ECx Client in Windows

To install the ECx Control client application (“UltraVNC”) in
Windows:

Insert the ECx installer disc in the computer CD or DVD

drive.

Open the Windows Client folder.

Double-click the “UltraVNC-Viewer.exe” file.

Follow the on-screen installation instructions to complete

the installation.

Installing the ECx Client on Mac

To install the ECx Control client application (“Chicken of the
VNC”) on Mac:

Insert the ECx installer disc in the computer CD or DVD

drive.

Open the Mac OS X Client folder.

Double-click the “cotvnc-20b4.dmg” file.

In the window that opens, drag the “Chicken of the VNC”

icon to copy it to a location on your hard drive.

Uninstalling ECx Host Software

If you need to uninstall ECx software from your VENUE sys-
tem, you can do so from the system desktop.

To uninstall ECx host software from your VENUE system:

Do one of the following to put your system into Config

Mode:

• Press the Console Config switch on the console

– or –

• Double-click the

Mode

box in the bottom-right corner of

the screen.

Go to

Options > System

Hold the Control key and click

Shut Down

to go to the sys-

tem desktop.

Locate and double-click the ECx host software uninstall pro-

gram (C:\Program Files\D-Show Ethernet Control Software\
Uninstall.bat).

The ECx host software is uninstalled, and the D-Show soft-
ware automatically restarts.

Reinstalling ECx Host Software

If ECx is installed on your VENUE system, you will have to re-
install the ECx host software after performing a System Re-
store or an Update.

System Restore

If you perform a complete System Restore, the

ECx host software must be reinstalled from its original in-
staller disc. See “Installing ECx Host Software” on page 243.

Update

If you perform an Update, you must still reinstall the

ECx host software. You can reinstall without using the ECx in-
staller disc because an Update leaves the ECx installer on your
VENUE system’s hard drive. You can also reinstall using the
original installer disc.

To reinstall after an Update without using the ECx installer disc:

Remove any USB key disks from all USB ports, and make

sure no installer discs are in the CD-ROM drive.

Do one of the following to put your system into Config

Mode:

• Press the Console Config switch on the console.

– or –

• Double-click the

Mode

box in the bottom-right corner of

the screen.

Go to the

Options > Systems

page.

Click the

Update

button.

The ECx folder will remain on your VENUE system hard
drive after uninstalling,

courtesy of

www.sxsevents.co.uk

Phone: 0870 080 2342

email: [email protected]

Event production and Audio-Visual Services

www.sxsevents.co.uk

Содержание VENUE SC48

















































































































































































































































































Результаты поиска

Содержание VENUE SC48

Отзывы:

Похожие инструкции для VENUE SC48

Бренды по названию

Популярные бренды

Avid Technology VENUE SC48, Руководство пользователя

Результаты поиска

Содержание VENUE SC48

Отзывы:

Похожие инструкции для VENUE SC48

Бренды по названию

Популярные бренды