Avid Technology SR2400, Руководство по установке, Страница: 50 / 90

Chapter 3 Setting Up a PortServer Pro Workgroup
50
In a PortServer Pro workgroup, workspaces are mounted using one of the
following methods:
• By the PortServer Pro system receiving requests from Ethernet clients.
Mounting workspaces only when a request is received helps to conserve
the 21 available drive letters for workspaces that are actually needed.
• By configuring the AISPortServer.ini file to mount workspaces at specific
drive letters. This allows you to have some workspaces, that might be
common to all users, always mounted at the same location. The remainder
of the workspaces are mounted as the PortServer Pro system receives
requests from Ethernet clients.
• By deselecting the “Enable dynamic mounting of MediaNetwork
workspaces” option on the Avid Unity PortServer Service Configuration
dialog box. This mounts the first 21 workspaces found on the
MediaNetwork storage like the basic PortServer system.
• By configuring the AISPortServer.ini file to mount workspaces at specific
drive letters and by deselecting the “Enable dynamic mounting of
MediaNetwork workspaces” option on the Avid Unity PortServer Service
Configuration dialog box. This allows you to have some workspaces, that
might be common to all users, always mounted at the same location. The
remainder of the workspaces are mounted automatically from the first 21
workspaces found on the MediaNetwork storage like the basic PortServer
system.
n
PortServer Pro clients make requests for shared workspaces using the
Connection Manager application. For more information on using the
Connection Manager, see the
MediaNetwork Windows Ethernet Client Quick
Start Card or the MediaNetwork Macintosh Ethernet Client Quick Start Card .
Preparing for Network Installation of the
PortServer Pro Windows 2000 Client Software
The PortServer Pro Windows 2000 client software installer is included as part
of the PortServer installation (in D:\Program Files\Avid
Technology\AvidUnity\Ethernet Setup Client if you accepted the defaults
during installation). If you share the Ethernet Setup Client folder, you (or other
users with appropriate access permissions) can install the client software on
any connected Windows 2000 system over the network without using the
MediaNetwork CD-ROM.