Avid Technology SR2400, Руководство по установке, Страница: 48 / 90

Chapter 3 Setting Up a PortServer Pro Workgroup
48
Configuring the PortServer Pro System Network
Properties
You need to configure each PortServer Pro system’s network properties so the
PortServer Pro system can communicate with the network. Each PortServer
Pro system has three network connections: a Gigabit Ethernet adapter and two
built-in 1 Gigabit ports. You need to provide a static IP address and subnet
mask for the Gigabit Ethernet adapter.
n
By default, the Gigabit Ethernet adapter is enabled and the built-in Ethernet
adapters are disabled.
To configure the network properties for the Gigabit Ethernet adapter:
1. Right-click the My Network Places icon on the desktop, and select
Properties. The Network and Dial-up Connections window opens.
2. Double-click the Local Area Connection icon. The Local Area
Connection Status dialog box opens.
3. Click the Properties button. The Local Area Connection Properties dialog
box opens.
4. Select the Internet Protocol (TCP/IP) option.
5. Click the Properties button. The Internet Protocol (TCP/IP) Properties
dialog box opens.
6. Select the “Use the following IP address” option. The text boxes in this
section of the dialog box change from gray to white.
7. Type an appropriate, unique IP address in the IP address text box and
press Enter on the keyboard (see “IP Addressing Strategies for
PortServer Pro Workgroups” on page 49 ). The PortServer Pro system
should fill in the subnet mask automatically. If not, type the subnet mask
in the Subnet mask text box.
8. If necessary, type a gateway IP address in the Default gateway text box.
9. Click OK to set the changes.
10. Close all open windows and dialog boxes.
11. Navigate to D:\Program Files\Avid Technology\AvidUnity\
PortServerStartup.