Avid Technology SR2400, Руководство по установке, Страница: 43 / 90

Installing the Ethernet Switch
43
Installing the Ethernet Switch
The Ethernet switch allows you to connect multiple PortServer Pro clients to
the PortServer Pro system and perform real-time media transfers.
Avid supports the use of several Ethernet switches to connect Ethernet clients
to a PortServer Pro workgroup:
• Cisco WS-C3750G-24T-S — 24 10/100/1000 ports (and 4 SFP Gigabit
ports), maximum 20 clients. This replaces the Asanté 35160-T.
• Asanté GX5-424W — 24 10/100 ports and 4 Gigabit ports (2 copper and
2 fibre). This replaces the Asanté 3524-SXT.
• Asanté IC 35160-G — 16 10/100/1000base-T fibre GBIC ports and 4
10/100/1000base-T copper ports. This replaces Asanté IC 65120-12G.
Some switches contain 24 ports, but only only 20 clients are allowed. For
information about other switches and their application in a PortServer Pro
workgroup, contact your local Avid Sales Representative or your Avid
Reseller.
Installing the Ethernet Switch Rack-Mount Bracket
Follow the instructions supplied with the Ethernet switch to rack mount the
switch, ensuring that:
• The bottom of the Ethernet switch is at the bottom of a U-alignment
space.
• There is adequate space to run and connect Ethernet cables to the front of
the Ethernet switch.
Connecting the Ethernet Switch Power Cord
To connect the Ethernet switch power cord:
1. Plug one end of the power cord into the back of the Ethernet switch.
2. Plug the other end of the power cord into a power strip in the back of the
rack.