manualshive.com logo in svg

Avid Technology NEXIS E2, Руководство по установке и обслуживанию, Страница: 17 / 89

Поделиться
Скачать
Avid Technology NEXIS E2 Скачать руководство пользователя страница 17

System Details

9

Control Panel for all 2U and 4U Chassis

The following figure shows the control panel on the left side of the chassis on all of the following:

•

Avid NEXIS | E2

•

Avid NEXIS | E2 SSD

•

Avid NEXIS | E4

•

Avid NEXIS | PRO

•

System Director Appliance

Control Panel Features: All 2U and 4U Chassis

Control Panel Features on all 2U and 4U Chassis

 

5U Chassis Details

The following systems use a 5U chassis:

•

Avid NEXIS | E5

•

Avid NEXIS | E5 NL

Description

Status/Purpose

System Power LED

Green when system is on (operational).

Amber when system is in standby mode (not operational).

Module Fault LED

Amber when there is a system hardware fault. In that case, another LED on the faulty 
component may be lit. 

Logical Fault LED

Amber when something other than the enclosure management system (usually a drive) 
fails.

Enclosure ID Display Displays the enclosure identification number (optional; useful with multiple enclosure 

systems)

Содержание NEXIS E2


























































































Отзывы:

Нет отзывов