Avid Technology MediaStream ConnectPlus 1000, Инструкция по установке и эксплуатации

Страница: 53 / 74

FTP Clients and Servers
53
Client (Proxy) Control of Transfers between Servers
In the second model, the client controls the transfer of files between two hosts from a third
client
control machine. The ConnectPlus 1000 uses this model. In this model, the FTP client,
controls the session between two servers. The client opens the session and issues the transfer
commands. The transfer of data occurs between the two servers with the results of that
transfer reported to the client. This model is often referred to as a proxy transfer.
Client Control of Transfer between Servers
FTP Login to ConnectPlus Gateway
When establishing an FTP session over the gateway, you must log in to the system with the
correct user ID and password to gain access to the Video File System. To log in you need to
supply three IDs:
• FTP connection – The gateway hostname gwy<xxyy> with xx designating the cluster
ID (1-16) and yy designating the gateway number (01-08). The command line entry
would be:
ftp gwy0101 for gateway 1 on cluster 1.
• User ID – The Avid default ID is video_fs
• Password – The Avid default password is .video_fs
n
If you are using a Graphic User Interface (GUI) FTP client, you need to refer to the software
documentation supplied by the vendor to determine specific login and setup requirements
.
Login to Other ConnectPlus Products
You may be connecting this gateway to another gateway product. If transferring files to a
MediaStream Server such as the MSS1600/700 through a ConnectPlus, you may need to log
into the gateway on the other system. The login procedures are slightly different on those
products. The login values required for each gateway product are as follows: