Avid Technology MediaCentral Command, Руководство по установке и настройке

Страница: 141 / 194

Programming the X-keys
141
n
Some sites might use key caps that cover 2 or 4 buttons on the keypad, turning a set of buttons into a
single key. If that is the case, select the left box to set the “2-button” key. For 4-button keys, select the
upper left box.
7. Assign an action to the key by selecting it from the list of those available in the Choose Action
dialog box. The most commonly used actions will appear open for your selection already.
- The Playlist > Channel Group actions refer to channel group commands, such as lock,
unlock, and assign channel.
- The Playlist > Selection actions refer to selected items on the playlist, such as play selection,
cue selection, stop selection, and move up/down.
- The Control actions refer to channel-specific actions that correspond to a particular index as
configured when mapping indices to channel names. An example of this would be for a key
to initiate a play command on a single channel. Assigning the channel-specific actions
affects only the keypad attached to the workstation at which the assignments are
programmed.
8. Click OK.
9. Repeat steps 5-7 as needed.
10. Click Apply.
11. Click OK.
The following graphic shows a closeup of the first row of keys after they were assigned to the four
playout control options of play, cue, pause, and stop.