Avid Technology MediaCentral Command, Руководство по установке и настройке

Страница: 121 / 194

Setting up Device Channels
121
5. Click Add.
6. Enter the channel’s name, which can be any alpha-numeric character(s), based on the following
guidelines:
7. Select the name and type of the device from the lists. The device name is the host name for the
device. If it does not appear in the list, you must enter it.
n
For third-party video devices controled via VDCP, the device name must match the device name set
for the Avid Video device service in Avid Service Configuration.
8. Select the channel index, using the Channel index spinbox.
9. Enter any notes you want, which can help identify the device should future alterations be
necessary.
Device Type
Channel
Index Channel
Name
Description
n
All channel names within a single device type must be unique.
Multi Stream 1 A AirSpeed Multi Stream video servers begin channel
designations at one (1). The channel names can be
anything, but a typical example is alphabetic names
from A through F.
An AirSpeed 5000 can be configured in the same way
as the Multi Stream video server.
Multi Stream 2 B
Multi Stream 3 C
AirSpeed 2 A AirSpeed (classic) video servers begin channel
designations at one (1); however, the first channel is
reserved for video ingest. So the first available channel
for playout or browse purposes would be channel 2.
AirSpeed 3 B
Video device
service 1 A All supported third-party video devices begin channel
designations at one (1). The channel index values here
must match the channel index values set for the Avid
Video device service in Avid Service Configuration.
Video device
service 2 B
Graphic device
service 0 1 All devices using the Avid Graphic device service
begin channel designations at zero (0).
Graphic device
service 1 2