Avid Technology MediaCentral Command, Руководство по установке и настройке

Страница: 106 / 194

CII Integration
106
To delete a style:
1. Select a style from the list of styles on the Styles tab.
2. Click Delete.
n
Deleting a style in the GIE does not remove anything from the actual graphics device. It deletes the
style from the inventory (located in the root directory on the PC) than Command uses to control the
device.
After you have created all of the styles, you need to define them in Command.
To add styles to a Command Workstation:
1. Select Tools > System Settings.
2. Select Playlist.
3. In the Graphics Style section, click the Add button to add styles to the list.
n
The default style must also be defined in SYSTEM.MAP in Newsroom Mgmt.. For instance:
video ABCD - A ;
cg 1 - hyperx WAVD;
cg 2 - microx STILLS;
To assign a style for a standalone playlist:
1. Right-click on the playlist’s channel group icon.
2. Select Edit properties for this channel group. The Playlist Channel Group Properties dialog box
appears.
3. Enter the style.
4. Click OK.
The following list contains further guidelines related to playback.
• Numeric only items do not need to be added to the GIE.
• Numeric only items will show up originally as unavailable in the Command playlist, even if the
item exists on the graphics device. Lock the channel group; this will make Command check for
availability and correct the status.
• In Command, page numbers are written when the playlist is locked. This is by design and is
different from ControlAir, where the page numbers were written when the show was loaded.
• If a new graphic is created in the GIE, the new graphic will not show up until after the monitor
server for the show is turned off and back on in Newsroom Mgmt..
Configuring Command Device Channels and Channel Groups
Some additional configuration is required to enable Command via the Graphic device service—part
of which is done at a Command Workstation, and part of which must be done on the device itself.