Avid Technology Isis 7000 Скачать руководство пользователя страница 111

Страница: 111 / 223

License Activation Without an Internet Connection

111

To activate the ISIS software license from a separate computer:

1. Locate your System ID and Activation ID card included with your new System Director.

2. Open the Avid License Control tool, click Start > Programs > Avid > Utilities > Avid

License Control.

The Avid License Control tool opens.

3. Click Activate next to the Avid ISIS software.

4. Select “I am not connected to the Internet and will be using another computer that is

connected to the Internet,” then click Continue.

5. Enter your system identification number in the System ID text box.

6. Enter your activation identification number in the Activation ID text box.

7. Click Next.

8. Follow the instructions in the Avid License Control tool, then click Next.

Your System ID, Activation ID, and Device ID are displayed on the Activation tab, write these
numbers down to use later. These IDs are displayed in the License Profile tab after your Avid
software is activated.

9. On a computer with an Internet connection, open a Web browser and navigate to

http://avid.com/license

Содержание Isis 7000
































































































































































































































Результаты поиска

Содержание Isis 7000

Отзывы:

Avid Technology Isis 7000, Руководство по установке, Страница: 111 / 223

Результаты поиска

Содержание Isis 7000

Отзывы: