ISIS 2000-120 to ISIS 2000-240 Engine Upgrade
131
This creates the RAID groups and could take several minutes, wait until a message informs
you that the configuration has completed.
18. Bind your new Storage Manager, using the ISIS Management Console > Storage Managers
page. For binding instructions, see
“Binding the Storage Managers” on page 78
n
After the new Storage Manager is Bound, you can add additional ISIS 2000 Engines and Bind
them. Then select all your new Storage Managers and do a single Add redistribution. For Add
redistribution instructions see the
Avid ISIS Administration Guide
.
19. Update the software on your Avid ISIS clients.
Clearing Foreign Configurations on Used Drives
If installing used drives into your ISIS 2000 Engine, use the following procedure to clear the
configuration and make the used drive into a raw spare.
To replace a drive with a drive that is not raw:
1. To open the Storage Manager Agent, do one of the following. For more information see the
Avid ISIS Administration Guide
.
t
From the Storage Managers tool, select an IP address from the IP Addresses panel of the
Details panel, and click the Info button.
t
From the Storage Elements tool, select an IP address from the IP Addresses panel of the
Details panel, and click the Info button.
t
From the System Director desktop, click the “Storage Manager Agent Page” button on
the ISIS Launch Pad.
2. Type the Administrator password into the password field.
n
The default Agent Administrator password is “is-admin.”
3. Click the Advanced tab.
If the System Status Panel in the Management Console reports a foreign disk or no spare.
Use this function to clear the foreign configuration and create a spare disk. This function
requires the Administrator password.
c
Resetting a disk is a destructive operation which will permanently delete all data currently
stored on the disk.
4. Select Clear Foreign Config from the left pane.
5. Type the Administrator password into the password field.
Содержание ISIS 2000
Страница 1: ...Avid ISIS 2000 Setup Guide...