Special Notes
9
Special Notes
This section contains important information about the operation of the
AirSpeed in your workgroup environment.
Keyboard, Video, Mouse Switches
Some Raritan
™
keyboard, video, and mouse (KVM) switches fail to operate
the AirSpeed correctly when using the newer thin 4 meter Raritan cables.
To achieve the best performance from your AirSpeed, Avid recommends
that you power cycle your AirSpeed once a week (7 days). Power cycling
the AirSpeed refreshes the memory.
3-Button Mouse
The middle button on a 3-button mouse can perform illegal actions and cause
errors when used with the AirSpeed UI. Do not use a 3-button mouse with
AirSpeed.
Network Changes Using the AirSpeed UI
Any changes made in the Setup > Network tab of the AirSpeed UI, will
require you to restart the AirSpeed. You must click Shutdown and select
“Restart Entire System.”
LTC Input and Output
The Longitudinal Timecode (LTC) connectors on the rear of the AirSpeed are
designed to accept a valid LTC input and pass the signal through to the LTC
Out 1 connector. This connection is used to daisy-chain the LTC signal to
other devices. The LTC Out 2 functionality has not been implemented in the
initial release of AirSpeed.
