Avid Technology AirSpeed series, Инструкция по установке и эксплуатации

Страница: 83 / 282

AirSpeed Multi Stream Configuration
83
AirSpeed Multi Stream Configuration
AirSpeed Multi Stream operates as a member of an integrated Interplay workgroup to utilize
built in Interplay Transfer and shared storage.
Configuration Requirements for AirSpeed Multi Stream
Each AirSpeed Multi Stream must be configured with the following:
• You must have the Avid Unity workgroup environment already operating before adding
the AirSpeed Multi Stream to the environment.
• Site-specific settings need to be applied for the AirSpeed Multi Stream to operate in
your workgroup environment. Each AirSpeed Multi Stream installed needs to be
uniquely configured.
• You must create a site-specific host name/domain name of the AirSpeed Multi Stream,
including an IP address and mask for the network interface.
• The DNS server IP address (required for Interplay)
• The Shared Storage Client for Avid Unity ISIS or MediaNetwork (ethernet attached)
• Interplay user name and password
• Interplay Engine
c
Do not connect any AirSpeed Multi Stream to your workgroup environment until you
have assigned a new, unique IP address to each AirSpeed Multi Stream.
Once these requirements are met, and you have installed all of the necessary hardware and
software for your site, you can configure the AirSpeed Multi Stream. For more information
on specific tasks involved when configuring AirSpeed Multi Stream, see
“AirSpeed Multi
Stream Configuration Checklist” on page 84 .