Avid Technology AirSpeed series, Инструкция по установке и эксплуатации

Страница: 195 / 282

Monitoring Studio Transfers
195
Send to Playout Server or Studio
The Studio name appears in the Avid editor’s Send To Playback list when you are connected
to the studio. When a sequence is ready for playout, highlight the sequence and send it to the
Studio in the playback list.
To send a sequence to a Studio, do one of the following:
t
Right-click on the selected sequence and select Send to Playback > studioname.
t
Highlight the sequence in your bin, and select Transfer > Send to Playback >
studioname.
The Send To Playback list is not automatically refreshed with network changes. If the Studio
has become unavailable, the Studio name remains in the Avid editor’s Send To Playback list.
To check if the Studio is still available, select Transfer > Reconnect To Server. If the Studio
name is removed from the Send To Playback list, all of the Studio members are no longer
unavailable. If you send a sequence to a Studio that is unavailable, the result is a failed
transfer.
n
As long as one member of the Studio is available, the Studio name appears on the Send To
Playback list and the transfer is successful. A Studio is only unavailable when all of its
members are unavailable.
Monitoring Studio Transfers
After you have sent a sequence to playback within the Avid editor, you can monitor the
transfer in the Avid editor. The AirSpeed Studio Transfer Monitor dialog box automatically
appears on the Avid editor the first time you send a sequence to a Studio. The dialog box first
appears minimized in the application. When you click on the minimized dialog box, the
dialog box opens and stays on top of the Avid editor. This dialog box can be minimized
again, but cannot be closed. The following figure shows the AirSpeed Studio Transfer
Monitor dialog box as it appears on the Avid editor.