Avid Technology AirSpeed series, Инструкция по установке и эксплуатации

Страница: 171 / 282

Editing Clips
171
Mark In
Mark Out
Duration
Specifies which portion of the clip to play. Click on the Mark In , Mark
Out and Duration buttons to make changes to these items.
Headfr (Headframe) Sets the headframe image. When the monitor window displays an image
representative of the clip, click this button. The timecode shows the
position in the clip from which the image was taken.
Goto Moves you to the beginning, end or headframe set point of the clip.
Audio Channels AirSpeed Multi Stream records the audio portion of its clips in two stereo
pairs. This allows you to record and play back two different sound tracks,
for programs broadcast in two different languages. For the purpose of
editing a clip, use the radio buttons to select either stereo pair, in audio
channels 1 and 2 or 3 and 4.
Use Hardware Channel Select this check box if you want to use the selected hardware channel.
New Sub-Clip Click on this button to create a subclip based on the clip you
are previewing.
Timeline Scrubber Moves you forward and backward through the full length of the clip.
Thumbwheel Allows fine-tuned searches, but it is limited to a small area. When you
reach the end of the scrub, lift the mouse to continue.
Playback Controls Allows you to play the clip to verify your settings. For more information
on the behavior of these button, see
“Playback Controls” on page 172 .
Preview Dialog Box Fields and Controls (Continued)
Setting Description