Avid Technology AirSpeed series, Инструкция по установке и эксплуатации

Страница: 152 / 282

4 Fundamentals
152
Selecting Clips
Simply click on a clip to select it.You can also select multiple clips. There are two methods
for selecting multiple clips.
To select individual clips
t
Ctrl+click and select individual non-consecutive clips.
To select a series of clips
t
Shift+click and select multiple consecutive clips.
When you right-click in a MiniMonitor window, this popup menu
appears. A few of these are the same functions as the Air Menu.
The most important functions are:
Select Input
— Enables you to view the input for the channel.
Options are Adaptive, Frame Avg., and Footprint.
Playback Mode
— Configures AirSpeed Multi Stream to play clips.
Record Mode
— Configures AirSpeed Multi Stream to record clips.
Record — Prompts with the Item Properties dialog box before
recording clips.
Quick Record — Records clips using settings in the current
template.
Cue Record — Prompts with the Item Properties dialog box, then
waits until you click the Record button on the MiniMonitor before
recording.
Quick Cue Record
— Waits until you click the Record button on the
MiniMonitor, then records clips using settings in the current template.
Edit Template
— Opens the Edit Template for Channel dialog box
and enables you to edit the template for the selected channel. For
more information, see
“Editing the Current Template” on page 180 .
Eject
— Ejects the clip.
Display Current Timecode
— Toggles the time count displayed in
the MiniMonitor. When checked, it counts up from zero during
playback. Uncheck it to show the time remaining in the clip.