Avid Technology AirSpeed Multi Stream, Инструкция по установке и эксплуатации

Страница: 60 / 398

1
AirSpeed Multi Stream Overview
60
Keyboard and Mouse
You need to provide your own USB keyboard and mouse to navigate through the AirSpeed
Multi Stream UI. The keyboard and mouse plug directly into the USB connectors in the rear
of the chassis.
n
Using a PS2 keyboard or mouse with a PS2 to USB connector might cause problems with the
system. It is recommended that you use a native USB keyboard and mouse.
For more information, see “Connecting USB Devices (Mouse and Keyboard)” on page 82 .
9 REF (IN/THRU) (Reference
Input/loopthrough) Can be used as either:
• Video reference (REF) input for a black
burst/tri-level or house sync signal, BNC
connector.
• Video reference (REF) loop through sync signal
for daisy-chaining the house sync to other media
equipment, BNC connector.
n
If you are only using one REF IN signal, and
not looping, the 2nd connection must be
terminated.
10 LTC (LTC IN/THRU) Can be used as either:
• Longitudinal timecode input, BNC. Provides a
feed to the AirSpeed Multi Stream server for an
analog timecode signal, allowing an alternate
source generated timecode to be applied to the
captured material.
• Longitudinal timecode loop through BNC
connector. Analog timecode signal that can be
used by external devices that require such a
signal for their capture or command and control
operations.
11 CONSOLE The RS-232 port is used for terminal access to the
AirSpeed Multi Stream. Used by Avid personnel for
troubleshooting purposes.
Number Label Function