Avid Technology AirSpeed Multi Stream, Инструкция по установке и эксплуатации

Страница: 58 / 398

1
AirSpeed Multi Stream Overview
58
7 REF (IN/THRU) (Reference
Input/loopthrough) Can be used as either:
• Video reference (REF) input for a black
burst/tri-level or house sync signal, BNC
connector.
• Video reference (REF) loop through sync signal
for daisy-chaining the house sync to other media
equipment, BNC connector.
n
If you are only using one REF IN signal, and
not looping, the 2nd connection must be
terminated with a 75 ohm-rated terminator. If
the AirSpeed Multi Stream is in the middle of
your reference loop, connect the remaining
REF IN/THRU conector to the next device’s
REF input.
8 LTC (LTC IN/THRU) Can be used as either:
• Longitudinal timecode input, BNC. Provides a
feed to the AirSpeed Multi Stream server for an
analog timecode signal, allowing an alternate
source generated timecode to be applied to the
captured material.
• Longitudinal timecode loop through BNC
connector. Analog timecode signal that can be
used by external devices that require such a
signal for their capture or command and control
operations.
n
If you are only using one LTC IN signal, and
not looping, the 2nd connection must be
terminated with a 75 ohm-rated terminator. If
the AirSpeed Multi Stream is in the middle of
your LTC loop, connect the remaining LTC
IN/THRU conector to the next device’s LTC
input.
9 CONSOLE The RS-232 port is used for terminal access to the
AirSpeed Multi Stream. Used by Avid personnel for
troubleshooting purposes.
Number Label Function