Avid Technology AirSpeed Multi Stream, Инструкция по установке и эксплуатации

Страница: 137 / 398

AirSpeed Multi Stream Workgroup Configuration
137
Configuring the Avid Service Configuration
The first step is to open and configure the Avid Service Configuration.
n
You can open the Avid Service Configuration on any workstation in the workgroup that
includes your AirSpeed Multi Stream server, if the Avid Service Framework is installed on
the workstation
To configure the Avid Service Configuration:
1. On the AirSpeed Multi Stream, select Start > Programs > Avid > Avid Framework >
Avid Service Configuration.
The Select Workgroup dialog box opens.
2. Do the following:
a. Type the name of the workgroup you want to use.
b. Select the “Always select and use this Workgroup” check box.
c. Click Select.
The Avid Service Configuration dialog box opens, and a list of all of the systems logged
in to the Avid Service Framework appears. In the Hosts column, your AirSpeed Multi
Stream system name appears in the list in
bold type (if you are connected to that
system).
3. Click to expand your AirSpeed Multi Stream server name to see the following services:
- AirSpeed Multi Stream Integration Service
- Avid Workstation Service
- Avid AirSpeed Multi Stream Device Service (optional)
4. Select AirSpeed Multi Stream Integration Service .
The Administrator Password Needed dialog box opens.