ZT350 Dimensioner User Instructions
27
4.1 Charging the ZT350
4 Maintenance
4.1 Charging the ZT350
The ZT350 is charged when connected to a PC’s USB port. Connect the supplied USB
cable between the ZT350 USB connector, shown below, and a PC’s USB port. The
device will charge while off. The charging LED will be amber when charging and off
when complete. Charge time is approximately 2 hours.
4.2 Battery replacement
To replace the battery
1.
Remove the silicone cover
2.
Slide the back cover down and remove.
This exposes the battery compartment and the tape cassette, as shown
below:
3.
Remove the battery.
4.
Insert new battery in the same orientation as the old one.
Mini USB
connector
Charging
LED
Battery
Tape
cassette
Содержание ZT350
