1
www.averyweigh-tronix.com/cubetape
Press to record measure
Scan barcode
Send data record
Append; save data
Backspace; power on/off
All buttons can be used for navigation
under menu mode except for
Exterior Overview
LED
Battery Compartment
Tape Tip
USB Port
Charge Light
Rubber Boot
Tape Cassette
Tape Tip
Cubetape PRO Quickstart Guide
Return to Last Recorded Data
Press several times until the cursor is in the length field;
Press this will display the last recorded measurement on screen.
Power On/Off
To turn on the device, press once.
To shut down the device, press for approximately 3 seconds, then release when “power off” is indicated
on screen (or 5 beeps are heard).
Taking Measurements
While the cursor is in the length field, extend the blade and take the measurement (L, W or H), press or
to capture the measurement.
