Avery Dennison ALS 204, Руководство по обслуживанию и установке

Страница: 178 / 224

178
9 R
EPAIR
9.1 T
ESTS
ALS
20X
256
9.1.1
Sensor test

Call the SERVICE/DIAGNOS. > Sensor Test function.
– Display:
alternating with:
– 00.01 = Identification number of the sensor
– 1 = value currently being transmitted by the sensor
“Labels”

Press the key to change to the next sensor in
the list

Press the key to change to the preceding sen-
sor in the list
Sensor Test
00.01 1
Sensor Test
Labels. 1
Sensor ID Name Value Test
00.01 Labels.
(Label sensor) 1 or 0 Move label material through the sensor; a gap
between labels (punch) must cause a change
between 1 and 0. If no change takes place:

Adjust the sensor (
MACHINE SETUP > Sensor
Adjust
)
00.02 Starts.
(Photoelectric product sen-
sor) 1 or 0 Breaking the light beam must cause a change
between 1 and 0.
00.03 Capaci.
(capacitive label sensor) 1 or 0 Move label material through the sensor; a gap
between labels (punch) must cause a change
between 1 and 0.
00.04 Diamet.
(external photoelectric RD
sensor) 1 or 0 Breaking the light beam must cause a change
between 1 and 0.
00.05 APSF f.
(rotary encoder frequency) xxx Hz Shows current rotary encoder frequency when
labeller operating with automatic speed adjust-
ment.

Increase/decrease belt speed
– Displayed frequency must increase/de-
crease accordingly
00.06 APSF s.
(rotary encoder speed) xx.xx m/min Shows current belt speed when labeller oper-
ating with automatic speed adjustment.

Increase/decrease belt speed
– Displayed speed must increase/decrease
accordingly
00.07 APSF p.
(rotary encoder - pulses) xxxx – Counter for rotary encoder pulses
– max. count: 32767
– When exceeded rolls over to 0
[197] Overview for the “MACHINE SETUP > Sensor Test“
9
R
EPAIR
9.1
TESTS