Avery Berkel XM Series, Руководство по установке и программированию

Страница: 116 / 154

6.1 Overview 116
XM and XT Setup and Programming Guide
6
6.1 Overview
You can print the following Totals reports in Manager Mode > Totals :

Period 1 Reports

Period 2 Reports

Traceability Report

Security Report
Period 1 Reports and Period 2 Reports can be be cleared, but
Traceability Reports and Security Reports do not have periods and
cannot be cleared.
Period 1 and Period 2 Reports have two clearing options. You can
Print And Clear or Clear All , which clears all totals for that period.
The example below shows a list of available reports within the Period 1
and Period 2 Reports.
Figure 6.1 Example screen showing list of available reports
6.1.1 Report printing
Select Print for a non-clearing report
The totals for those values are carried forward.
Select Print and Clear for a clearing report
The totals are cleared and the relevant clearing date in the security
report is updated.
Important: If the report printing fails for any reason or you abort the report
printing, the totals will be unchanged.