avertX C7012-RW, Руководство пользователя

Страница: 28 / 49

28
PICTURE SETUP
Camera Tab
Use the Camera Tab section to modify picture settings for the camera. The sample image
will change as you modify the picture settings.
Note These settings can drastically affect the camera image. AvertX suggests that
these settings are only modified by a CCTV professional, or at the instruction or
a technical support representative.
Exposure
Min Shutter Speed – Choose a pre-determined
shutter speed.
Manual Mode – Changing the shutter mode to
manual will allow you to select the minimum shutter
speed that the camera will use. This can drastically
change the amount of light entering the camera.
Click Set to save your changes.
White Balance
Use the white balance setting to change color representation in difficult lighting conditions.
Auto – White balance works within its color temperature range and calculates the best-fit
white balance.
ATW – Auto-tracing white balance, the camera removes the signals within a range of
2000K to 10000K, which helps to even out the bright white portions of an image.
One Push – Balances color temperature based on a white object within the viewing area.
Manual – Change the white balance value by specifying the R grain and B grain.
Click Set to save your changes.