1. SAFETY RULES
SAFETY INFORMATION
NOTICE: Important safety information. It is important for the safety of persons to follow these instructions.
After reading the manual, please save it just in case of need in the future
ź
Do not allow children to play with the fixed controls (remote control).
ź
Keep the remote control unit out of reach of children.
ź
Frequently examine the screen installation for imbalance and signs of wear or damage to cables. Do not use if repair or
adjustment is necessary.
ź
Watch the moving screen and keep the people away until the screen is completely rolled in/out. It will help to avoid
injuries caused with moving screen.
ź
Do not attach any objects to the screen’s bottom bar. Screen damage and/or person injury danger.
ź
All installation work should be carried out by the qualified technician.
ź
Improper installation of the screen can cause device damage or health breakdown.
ź
Ceiling/wall installation can be done with the originally supplied mounting brackets dedicated for this model only.
ź
Do not do anything that may damage the power cable or power plug.
ź
Do not damage the power cable: make any modifications by your own, put it near the hot objects, bend it strongly,
twist it, pull out the power cable, put the heavy objects on the cable, wrap it into the bundle.
ź
Operation of the screen with damaged power cord can result with electric shock, electric short circuit and fire.
ź
Do not touch the power cable and the power plug with wet hands.
ź
Always follow the instructions described in the operating manual.
1.1. Declaration of Conformity CE
3
Under it’s own responsibility declares:
Projection screens series : Stratus 2, Stratus 2 Tension, Akustratus 2, Akustratus 2 Tension, Cumulus X,
Cumulus X Tension, Solar, Solar Prof., Solar Prof. Rental, Solaris, Solaris Tension, Contour,
The above mentioned products are in conformity with the following norms harmonized with the directives:
PN-EN 55014-1:2012
PN-EN 60335-1:2015
PN-EN 61000-3-2:2014
PN-EN 61000-3-3:2013
PN-EN 60335-2-97:2007
Manufacturer’s Declaration of Conformity CE No. 2E/2017
Paweł Zieliński
Pruszków 2017.10.02
All screens and accessories mentioned below are manufactured in Poland according to the essential
safety requirements of the Council Directives: Safety Directive 2001/95/WE with further updates,
EMC Directive 214/35/EC and LVD Directive 2014/30/EC
Avers Screens Sp. z o.o.
Al. Jerozolimskie 424A
05-800 Pruszków, Poland
Contour Tension, Cirrus S, Nimbus
Projector brackets: Alumount, Promount, SimpleMount, Shortmount, Simlift
Projector lifts: Simlift, Simlift XL, Simlift HC
Remote control system series: ALFA (IR, Radio, Trigger i Trigger Wireless), BETA, +DELTA
