81
4.9.6
To Setup Alarm Recording Setting:
1. Beside the Start Recording check box, click
Detail
.
2. In the Alarm Recording Setting dialog box, select the camera
to enable/disable video recording. Enable
All
to select all
cameras.
3. In the Frame Rate selection, select
As Setting
to record the
number of frames based on the Recording Setting or
Max
to
record the maximum of frames based on the available speed.
4. In the Stop Recording after text box, set the number in second
for the program to continue recording after the alarm has
ended.
5.
Click
OK
to accept the new settings and
Cancel
to exit
without saving.
4.9.7
To Setup SMS/MMS Setting:
To use this feature, GSM/GPRS modem is required. Connect the GSM/GPRS modem to the serial COMM
port of PC. Beside the SMS/MMS check box, click
Detail
.
Select the port number in Com Port drop down list from where the GSM/GPRS modem is connected.
1. Click
Modem Setup
button to automatically detect the Modem Baud Rate.
2. In
Local Phone Number
text box, enter the GSM SIM card phone number.
3. In
Phone Num
text box, enter the contact number.
4. You may now set to send thru SMS &/or MMS. If you enable SMS setting, just enter the message in the
text box. If you enable MMS, enter the APN name, WAP IP, MMS address and the message. If you are
not sure, please contact your mobile service provider.
5.
Attach image when sensor is triggered
select the camera that the images will be capture and send
when the sensor is triggered.
6. Click
OK
to accept the new settings and
Cancel
to exit without saving.
i
Make sure your ISP provider and cell phone provider both support JPG file format transmitting.
Содержание SA5104
Страница 1: ...AVerMedia SA series SA5000 6000E 7000H SA6032E SA6000E 9000E Pro User Manual...
Страница 146: ...140 5 When recovery process is completed click Shutdown 6 After DVR system is shutdown restarting the DVR system...
Страница 150: ...144 4 Mark the UPnP Framework check box and click OK...
