70
4.7 Sensor
Setting
The I/O device must be installed to use this function.
1. Click the drop-down list and select the sensor ID number.
2. Enter sensor name.
3. Click
External IO
to configure external I/O device if it is available(see also
)
4. The system automatically detects the sensor and input relates information. In the Content section, enter
sensor description.
5. In the test section, click
Test
to check the sensor status. Red is high and Green is low.
1.
Click
OK
to exit and accept the setting and
Cancel
to exit without saving the setting.
Содержание SA5104
Страница 1: ...AVerMedia SA series SA5000 6000E 7000H SA6032E SA6000E 9000E Pro User Manual...
Страница 146: ...140 5 When recovery process is completed click Shutdown 6 After DVR system is shutdown restarting the DVR system...
Страница 150: ...144 4 Mark the UPnP Framework check box and click OK...
