Avermedia C283S, Руководство пользователя

Страница: 47 / 59

English-40
6.3 Schedule Recording
“Recording Schedule” allows you to create a list of preset recording schedules.
To ensure schedule recording functions properly, please check the followings.
z Make sure to complete the IR Learning process via Home > Settings > IR Learning Setup .
Once you have the IR Learning completed, the Capture Box automatically powers on your STB
before recording, and then tunes into specific channel to record your scheduled program.
If the IR Learning process is not complete, keep your STB ON and make sure to tune to the
channel that you want to record from prior to task execution.
z Disable the “Standby/Power-saving” function on your STB.
z Some STBs go to standby mode instead of completely power off after pressing the power key.
Follow the instructions below to check if your STB still outputs signal after powering it off. If this
happens, keep your set-top box ON before recording.
Power off STB.
Make sure all cables and devices are firmly and well connected.
Then power on the Capture Box .
Check if the following screen or black screen appears:
Y
N
N o component input signal.
Check the followings:
1. Cables are properly connected.
2. Set-top box is ON.
STB does not output signal after powering off:
Your STB automatically powers on and then tunes
into specific channel before the scheduled start
time. After the task completes, the device
automatically power off. However, if your STB is
on before recording, it remains on after the task
completes.
STB still outputs signal after powering off:
Keep your set-top box ON before recording.
Your STB automatically tunes into specific
channel before the scheduled start time. After the
task completes, the STB remains on.
z To avoid recording failure, stay tuned on the channel that you want to record when recording is in progress.
z Close the menu before recording.