12
Skipping Unwanted Channels
If you want to exclude undesirable channels from your channel list, do
the following:
1. Click
the
Setup
button
and click the
Channel
tab.
2. In
the
S
etup
dialog box,
Channel
column, click the unwanted
channel. The check mark will be
removed, indicating that the
channel will be excluded from
your channel list and that you
won’t be able to access and watch
them through the
Channel Up/Down
button.
Selecting a TV Channel
There are three ways of switching between TV channels:
•
Click the
Channel Up/Down
buttons
repeatedly until you reach your desired channel.
•
Click
to open the
Numeric Panel
(as
shown to the right). Then click on the
Numeric
buttons
to get your desired channel number.
OR,
•
Click the
Setup
button
and click the
Channel
tab.
Under the
Channel
list, simply click on the desired channel.
You will need to perform fine-tuning only if the reception of the
selected channels is not clear. You can either click the
Auto Tune
button or manually adjust the
Fine Tune
slider to get a clear TV
picture.
