1.3.2 EB1304NET
SATA
+
(1)(2)(3)
(4)
(5)
(7) (8)
(9)
(10)
(6)
Name
Function
(1) DVR Power LED
Light when the unit is power on
(2) HDD LED
Indicate the hard disk running state. Light when the HDD is running
(Read/Write)
(3) IR Sensor
Receive signal from the remote control to operate the unit
(4) IR Sensor Port
To connect extended IR sensor cable
Connect to pen drive / external hard disk for backup
i
-
If the external hard disk is first time using, please format to
FAT32 format.
-
The DVR system supports external hard disk capacity up to
32GB.
(5) USB 2.0 Port
Use these buttons in playback mode to switch to display each channel in
full screen or view all channels at the same time
Use the buttons in setting password of OSD menu to:
For ”1”
For “2”
For “3”
For “4”
For “0”
(6) 1/2/3/4/Quad
(7) Record
REC
Start video recording. To stop recording, press
(8) Menu
Call up and exit the OSD main and sub menu
(9) UP/DOWN/SELECT
Use the
UP
and
DOWN
buttons to change setting and move to the left
and right, and
SELECT
to enter or make a selection
Use the buttons in playback mode to:
Display the play list and play the recorded video
Wind back the video playback at the speed of 2x, 4x, 8x or
16x
Fast play the video playback at the speed of 2x, 4x, 8x or
16x
(10) Playback/OSD Menu
Control Buttons
Temporarily freeze the video playback
3