19
Setup IP Address
Setup IP address of TR320.
There are two ways to setup IP address of TR320. Please follow the steps below to setup the IP
address.
Static IP Address
Assign a fixed IP address for TR320.
1. After starting-up, press
button on remote control to call out OSD menu.
2. Turn the DHCP off first. Go to
Camera
>
DHCP
>
DHCP
>
Off
then press
or enter button to
confirm the selection. The menu selection will switch to
“
Static IP
” when DHCP off is applied.
3. Use
▲
,
▼
, Enter button, and on-screen keyboard to setup the
“
IP
”, “
Gateway
”, “
Mask
” and “
DNS
”.
Dynamic IP Address(DHCP)
Get IP address from your local DHCP server.
1. After starting-up, press
button on remote control to call out OSD menu.
2. Use
▲
and
▼
buttons to select the
Camera
>
DHCP
>
DHCP
>
On
, then press
or enter button
to get IP address from local DHCP server.
Содержание TR320
