18
OSD SETUP
Before You Begin
Make sure all connections are connected successfully before using the TR320.
First Time Use
Trigger OSD Menu
Press
button on remote controller to call out the OSD menu. Use
to enter sub-menu, use
▲
and
▼
to move to the selection and use
to confirm the selection. Press
button to go back to the
previous level.
1
Blue text indicates the current selection.
2
“>” means has sub-menu or value selection.
3
Sub-menu
4
Column for enter value or value selections.
1
2
3
4
Содержание TR320
