52
NDI
You can activate the NDI function using this page. Camera firmware version v31 and later supports
NDI function.
To set up the NDI function:
1. Get an NDI license key.
This camera is compatible with NDI|HX of NewTek, Inc. To use NDI|HX, you are required to
purchase the license key from the URL of NewTek, Inc.
https://www.newtek.com/ndihx/products/upgrade/
2. Activate the NDI license key.
a.
Ensure the camera has been connected to the Internet.
b.
Check whether the firmware version of the camera is v31 or later to support the NDI function.
c.
On the camera Web page of
NDI
, click the
NDI Activate Function
button to enter the license
key and then click the
Activate
button. A message pops up for camera reboot. Click
OK
to
reboot the camera.
d.
After activating the license key, you should see the
NDI
option on the
Video Mode
drop-down list. Select
NDI
to enable the
NDI
function. Please refer to
Video Mode
in <
Video
& Audio
>.
[Note]
When NDI is enabled, the camera cannot support other video output source.
Содержание PTC310HWV2
