48
Hybrid Mode
You can benefit from the advantages of both the
Presenter
and
Zone
modes. The camera will start
tracking when a presenter is detected in the camera view. If the position where a presenter enters is
pre-configured as a tracking zone (preset area), the camera will activate as Zone tracking.
1.
Set up a
Tracking Point
. When losing tracking target, the camera will go back to the
Tracking
Point
(preset position). To set up the
Tracking Point
:
a. Select
Preset 1
from the drop-down list.
b. Use
,
,
,
,
and
to adjust the camera
view.
c. Click
Save
to save this preset point as the
Tracking Point
.
2.
To configure the zones (preset areas):
a.
Select a preset number from the drop-down list (
Preset 10 ~ 13
).
b.
Use
,
,
,
,
and
to move the camera to the desired position.
c.
Click
Save
to save the position to the selected preset number. A preset thumbnail will be
displayed below the preview window.
d.
Repeat the steps to set up more preset areas.
Содержание PTC310HWV2
