AVer CP Series OPS Installation Guide
Page 1
AVer OPS Computer for the CP Series IFP
Installation Guide
Thank you for purchasing the AVer OPS Computer. Please use the installation guide
below to guide the installation.
1.
Please power off the AVer IFP completely.
2.
Remove the OPS slot cover by removing the 2 screws as shown below
3.
Slide in the OPS computer as shown in the picture (Top right)
4.
The side with the fan should face outwards.
5.
Now make sure the screws are tightened.
Make sure both screws are
tighten
Important! The OPS computer does not support hot-swappable operation
(replacing or adding the OPS to the IFP without shutting down the IFP complete).
Simply plugging in or unplugging the OPS from the IFP while it is in operation
may damage the OPS computer or the IFP.
