169
Name
Function
(15) De-interlace
To enhance the video quality. Set the de-interlace mode to #1, if you are
capturing motionless picture and #2, if it captures lots of movement.
5.5
To Cut and Save the Wanted Portion of the Recorded Video
1. Use the Playback Control buttons or drag the bar on the playback progress bar and pause on
where you want to start the cut. Then, click
Segment
to set the begin mark.
2. Use the Playback Control buttons or drag the bar on the playback progress bar and pause on
where you want to end the cut. Then, click
Segment
to set the end mark. To cancel segmentation
or set the segment marks from the start, click
Segment
button again.
3. Click
Output
button to save the wanted clip.
4. In the Save As dialog box, locate on where you want to save the file, type the filename, and select
the video format.
5.6
To Bookmark a Section of the Video
1. Click
Bookmark
. The video playback stops when the bookmark button is executed.
2. In the Bookmark dialog box, you may do the following:
-
Add
to include the new reference mark in the bookmark list. You may select to
enable/disable
File Protect
to protect the bookmark file for overwritten.
i
-
When the bookmark is protected, the file won’t be overwritten.
-
The protected bookmark file will be deleted when the
Delete the recorded data
is
enable in the
Backup setting
.(also refer to
-
Edit
to change the mark description or enable/disable file protection.
-
Delete
to remove the selected reference mark in the list.
-
Delete All
to remove all the reference marks in the list.
-
Exit
to close Bookmark dialog box.
3. Select and click one in the bookmark list to preview the file.
